Among the furniture, there is such a kind of furniture that can be disassembled, that is, flat pack furniture. This kind of furniture is suitable for renting families, because it is more convenient to move. So what is the material structure of flat pack furniture? I believe many people still want to get an understanding, what about flat pack furniture? Let’s take a look

RTA furniture

Material structure of flat pack furniture:

Common facing materials for flat pack furniture include thin wood, melamine impregnated paper, wood grain paper, PVC rubber sheet, polyester paint and so on. The latter four finishes are usually used in low- and mid-range furniture, while natural veneer finishes are used in high-end products. flat pack furniture is made of medium-density fiberboard or particleboard for surface veneer and other processes. A large part of this kind of furniture is wood-grain simulation furniture. The veneers of some flat pack furniture sold on the market are becoming more and more realistic, with good gloss and hand feeling, and products with fine craftsmanship are also very expensive. Natural veneer veneer is difficult to maintain due to the solid wood veneer used, and the veneer has abrasion resistance, high temperature resistance and water resistance, which is much worse than that of melamine veneer. The editor of Nutrend Furniture Net feels that the combination of flat pack furniture is usually connected by various metal hardware to facilitate transportation. Because the base material breaks the original physical structure of the wood, the deformation of the wood-based panel will occur when the temperature and humidity changes greatly. It is much better than solid wood, and the quality is more stable than solid wood furniture.
RTA furniture

How about flat pack furniture?

flat pack furniture is a combination of man-made panels as the basic material, and after surface treatment, panel components are used as the main components and assembled. Can be divided into: density board and solid wood particle board. According to the different surface treatment methods, it can be divided into: paint, sticker spray paint, veneer spray paint, melamine veneer, vacuum blister, etc. The most environmentally friendly of these materials is melamine veneer furniture. Regardless of design, flat pack furniture also has advantages and disadvantages according to materials. Generally speaking, the price of flat pack furniture combined with board and wood is the highest, by the price of medium-fiber veneer plus spray paint, and the price of wood-based panels is the lowest for melamine-covered stickers. The price of each type of board is high and low, and the prices of hardware, glue and paint are also very different. After an account is calculated, the difference in the price of raw materials alone is no longer a decimal.

General flat pack furniture has no solid wood veneer and no solid wood, so the cost is low and the process is simple, so it is the cheapest; panel style furniture (wood-based panel is the main material, melamine coated stickers, stickers or spray paint, internal quality is relatively low); high-end flat pack furniture brands Main main materials and a brief introduction: solid wood, solid wood (mainly mahogany, cherry, oak, white walnut, maple, alder wood, etc.), boards, and other accessories (stone, glass, metal accessories, imported leather , Full green leather, half leather, leather, imported fabrics, linen, cotton, silk, wool). Knowing this, you probably know what material is good for flat pack furniture.

However, to choose a good flat pack furniture, it is not enough to know what material is good for flat pack furniture. It is also necessary to pay attention to its waterproof and moisture-proof performance, and also to pay attention to whether it meets the E1 standard of environmentally friendly materials. This is to protect the health of the family. key. Most of the panels that enter the market can meet the national standard E1 level, of course, there are also non-compliant. At present, the environmental protection of flat pack furniture is divided into E0, E1 and E2. E0 has the best environmental performance. E1 is an international standard, and E2 is a domestic standard. At present, most large furniture manufacturers use E1 environmental protection standards. E2 flat pack furniture is cheap and of poor quality. Post-80s generally have the concept of environmental protection, so you must look more carefully when choosing environmental protection standards. There are not many E0 boards in general shopping malls.
RTA furniture

When inquiring to the relevant salesperson, it must be required to show the relevant certificate, and it is determined that it is an E0 plate seller. Because flat pack furniture is generally disassembled and assembled, compared to solid wood furniture, its firmness is not very good, the service life is not very long, and the deformation is large. The material used in flat pack furniture is man-made board as the main substrate, supplemented by gorgeous paper, Polaroid paper or veneer, ash, and PU or PE paint. The process is simple, the cost is low, and PU and PE paint It is very toxic, and long-term use is not good for the health of the human body, especially for children, and it is not good for their growth and development. Of course, the above is just a detailed answer to which material is good for flat pack furniture. Everyone should understand it in more detail before buying.